1,8-桉叶油素自微乳给药系统的制备及质量评价和细胞摄取研究

目的优化1,8-桉叶油素(1,8-cineole,1,8-Cin)自微乳给药系统(1,8-cineole self-microemulsion drug delivery system,1,8-Cin-SMEDDS)处方,对其进行表征并进行细胞摄取考察。方法通过绘制伪三元相图,确定1,8-Cin-SMEDDS有效自乳化区域,进行初步处方筛选。以粒径和载药量为指标,采用星点设计-效应面法对1,8-Cin-SMEDDS处方进行优化并验证。荧光显微镜观察高糖损伤的人脐静脉内皮细胞(HUVEC)对1,8-Cin-SMEDDS的摄取情况。结果 1,8-Cin-SMEDDS的最佳处方是大豆油(7.5%)与1,8-Cin(22.5%)为混合油相,HS15(56%)为乳化剂,乙醇(14%)为助乳化剂,滴加纯水至8m L得半透明略带蓝色乳光液体。透射电镜观察其外观呈球形液滴,激光粒度Zeta电位测定仪测得平均粒径为(131.68±1.44)nm,Zeta电位为(-10.03±1.63)m V;HPLC法测得包封率为(99.890±0.012)%,载药量为(224.750±0.028)mg/g。HUVEC细胞摄取实验结果表明,细胞对1,8-Cin-SMEDDS的摄取高于游离1,8-Cin。结论 1,8-Cin-SMEDDS制备方法简便,重复性好,所得1,8-Cin-SMEDDS外观良好,包封率高,理化性质稳定,且能促进细胞摄取。     

基于响应面法优选美洲大蠊口腔原位温敏凝胶的制备研究

目的制备美洲大蠊Periplaneta americana口腔原位温敏凝胶。方法采用自由基聚合法首次以N-异丙基丙烯酰胺(NNIPAM)和甲基丙烯酸羟丙酯(HPMA)合成聚(N-异丙基丙烯酰胺-甲基丙烯酸羟丙酯)[P(NNIPAM-HPMA)]作为温敏材料;通过冷溶法制备美洲大蠊口腔原位温敏凝胶,采用Box-Behnken设计响应面法,以溶蚀时间、胶凝时间为评价指标,在固定美洲大蠊提取物用量基础上,对羟丙基甲基纤维素(HPMC)、聚乙烯吡咯烷酮(PVP K30)、P(NNIPAM-HPMA)的用量进行优选。结果通过原位聚合法合成了P(NNIPAM-HPMA)温敏材料;并用响应面法优选了可用于口腔的美洲大蠊原位温敏凝胶的处方,优选的处方为美洲大蠊提取物10%、HPMC 3.0%、PVP K30 9.5%、P(NNIPAM-HPMA) 10.0%,其溶蚀时间为2 h,胶凝时间8～9 s。结论优选得到美洲大蠊口腔原位温敏凝胶,为美洲大蠊提取物的口腔原位局部的临床应用奠定了科学依据。     

光学表面监测系统与CBCT确定左侧乳腺癌深吸气屏气放疗误差的比较

目的 建立本单位应用光学表面监测系统(OSMS)门控技术在左侧乳腺癌深吸气屏气(DIBH)放疗的基本流程,比较应用OSMS与CBCT确定左侧乳腺癌DIBH放疗摆位误差的一致性。方法 20例左侧乳腺癌患者采用DIBH方法治疗,OSMS与模拟定位DIBH体表外轮廓配准,CBCT扫描与模拟定位CT配准各记录得到误差数据,数据包括左右(x)、上下(y)、前后(z)方向平移误差和旋转误差Rx、Ry、Rz。采用Pearson法分析两者相关性,Bland-Altman法检验两者一致性。结果 两种方法呈正相关,x、y、z方向平移误差以及Rx、Ry、Rz方向旋转误差的相关系数分别为0.84、0.74、0.84、0.65、0.41、0.54(P<0.01),95%CI值分别为-0.37~0.42 cm、-0.39~0.41 cm、-0.29~0.49cm和-2.9°~1.4°、-2.6°~1.4°、-2.4°~2.5°,均<5mm和3°。20例左侧乳腺癌DIBH放疗患者系统误差<0.18cm,随机误差<0.24cm。结论 左侧乳腺癌DIBH放疗中应用OSMS与CBCT两种方式确定与模拟定位状态误差具有一致性,CBCT图像引导基础上使用无辐射的OSMS验证位置信息是安全可靠的。     

Same-Day Yttrium-90 Radioembolization: Feasibility with Resin Microspheres

Purpose

To evaluate the feasibility of a same-day yttrium-90 (⁹⁰Y) radioembolization protocol with resin microspheres (including pretreatment angiography, lung shunt fraction [LSF] determination, and radioembolization) for the treatment of hepatocellular carcinoma (HCC) and liver metastases.

星点设计-效应面法优化丁香苦苷聚乳酸-羟基乙酸纳米粒的制备工艺

目的优化丁香苦苷聚乳酸(Syr)-羟基乙酸共聚物[poly(lactic-co-glycolic acid),PLGA]纳米粒(Syr-NPs)的处方。方法采用纳米沉淀法制备Syr-NPs,以包封率、载药量、平均粒径以及总评"归一值"为评价指标,采用星点设计-效应面法考察PLGA质量浓度(A)、丁香苦苷质量浓度(B)、水相与有机相比例(C)3因素考察对包封率、载药量、平均粒径以及总评归一值的影响,以星点设计-效应面法选取最佳处方条件进行预测分析。结果最优处方工艺为PLGA质量浓度为9.63 mg/mL,Syr质量浓度为12.88 mg/mL,有机相与水相的比例为1∶9.46,制得的Syr-NPs的包封率、载药量、平均粒径分别为(27.86±0.87)%、(7.02±0.15)%、(110.0±1.20)nm。结论该方法稳定可行,可用于优化包载Syr的PLGA纳米粒处方与制备工艺。     

不同表面处理对LAVA树脂纳米瓷剪切强度的影响

目的 研究不同处理方式对树脂纳米瓷(LAVA Ultimate)与树脂水门汀粘接后剪切强度的影响。方法 本次实验分为喷砂实验和粘接实验两部分。将LAVA Ultimate切削成大小约 6 mm×6 mm,高度约为2 mm的样本80片,依照不同的喷砂时间和喷砂气压随机分为4组,每组10个试件,使用3M Single Bond Universal+3M RelyX Ultimate与纳米树脂柱粘接后在万能试验机上测试断裂载荷,计算剪切强度,选出最高组。同等喷砂条件下40个样本随机分为A(Single Bond Universal(3M)+RelyX Ultimate(3M)) ,B (Porcelain Primer(Bisco)+ All-bond Universal(Bisco)+RelyX Ultimate(3M))与纳米树脂柱进行粘接。粘接后再分成两个亚组,分别进行冷热循环5 000次和恒温水浴24 h。在万能试验机上测试断裂载荷,计算剪切强度,采用单因素方差分析对数据进行统计分析。结果 单因素方差分析结果表明不同喷砂条件的分组对剪切强度差异有统计学意义(第2组和第4组)(P=0.037);冷热循环后,A组和B组试件的剪切强度均有明显下降(P=0.003,P<0.01);A、B组不同粘接方式的剪切强度差异无统计学意义(P=0.062,P=0.671)。结论 0.2 MPa压力下喷砂14 s可明显提高树脂纳米瓷与树脂水门汀的剪切强度;冷热循环会明显降低剪切强度;粘接方式对剪切强度无明显影响。     

Dimensional study of prostate cancer using stereological tools

This study analyzes the dimensional changes of the glands from prostate cancer by applying stereology to estimate the variations in volume, length, surface, and cellular densities of tumor acini. Normal and tumor acini were visualized using immunohistochemistry for cytokeratin18. On immunostained sections, parameters related to the dimensions and cell population of prostate acini were measured. The immunohistochemical expression of proliferative cell nuclear antigen was also measured to correlate the quantitative changes estimated with the proliferative activity of the epithelium. The average cell volume in normal and tumor epithelium was estimated using the method of the nucleator. The relative size of the acini was similar in the carcinoma compared with the normal prostate. Within the acini, the fraction of acinar volume occupied by the epithelium was significantly higher in cancer than in the nontumor prostate. Conversely, the glandular lumen of the cancer acini is lower than in the normal acini. The significant increase of acinar length density in the carcinoma indicates that the glandular tree's growth in the carcinoma is higher and with more branches than in the case of nonneoplastic glands. The basal surface density is higher in the carcinoma than in the controls. The number of epithelial cells per unit length of acini was significantly decreased in the neoplastic glands. This "dilution" of the cell population along the cancer acinus can be explained by the significant increase in the tumor cell's mean cell volume.